CC Modems

Price: $29.26

BlackcatUSB Flash Memory Programmer This device is a cost-effective way to read or program thousands flash memory devices. This device can program all CFI compatible flash devices over JTAG and can also program SPI high-density serial flash devices. Hardware support can be added using a easy to use device script feature. A new solderless SOIC 16 socket adapter is available here.

Price: $11.21

This is a 14 Pin IDC jumper cable socket connector with “Octopus” loose female ends. With this cable, now you can connect to your Diagnostic Modem board headers in seconds without need of cutting or splicing wires to make an adapter to match your board header leads. Modify your SB6120, DPC3000, SBG6580 and many MORE, in seconds.

Price: $7.49

USB to RS232 TTL Module integrated a CP2102 is a single-chip USB to UART bridge which converts data traffic between USB and UART formats. The chip includes a complete USB 2.0 full-speed function controller, bridge control logic and a UART interface with transmit/receive buffers. The Module interfaces to microcontrollers through a 6 Pin 2.54mm single row pin header interface , can easily be connected to any microcontroller or FPGA and DSPs.

Price: $12.25

This is a 2×5 position star tips pogo pin adapter to flash your cable modem SB5100, SB5101 & SB5120, repairing or other jtag flashing application and comes with 4 spare pins.

• Do not requires to solder , prevent from overheating.
• Star head with sharp edge to secure good contact with the plate through holes on PCB board.
• This adapter is double row 2×5 position, 0.1 spacing with 2×6 housing to protect pogo pins and have better position accuracy.
• Pluger is Rhodium plated, use high quality pins, and contact is gold plated.
• The adapter is pins replaceable and the 4 spare pogo pins is in case you need replacement.

Price:5pcs Pack $4.86

This jumpers are individual wires in 200mm (8″) in length with FEMALE to FEMALE connectors.The wire pack are ideal for use on standard 0.1″ (2.54mm) pin headers. Wires are constructed with a flexible, durable, reusable, easy to trace jacket and with connectors that are easy to connect and disconnect.

Quality projects deserve use of these quality jumper wires. Use these to jump between any male pin to male headers point on any board. Multiple jumpers can be installed next to each other on a 0.1″ spacing.

Price: $4.99

This is a PACK of 5pcs – 3pin jumper wire cable with the length of 30cm (11.8″) – Female to Female Connectors.  This Jumper wire package is widely use to modify Netgear, Ambit, Webstar and many others that have the 4pin headers on the board.

Price: 1pcs $4.10

These handy little IDC port adapters make it easy to connect a standard 10 pin IDC cable to your target board without the need for soldering a traditional pin header in first. These are all in 2×5 configuration, but if you need a different size or pin count, please contact us for a quote.

Price: $11.25

This is a 2×6 position star tips pogo pin adapter for Linksys WRT54G, WRT54GL & WRT 54GS, to debrick router, update firmware or other jtag flashing application.

• Do not requires to solder , prevent from overheating.
• Star head with sharp edge to secure good contact with the plate through holes on PCB board.




• This adapter is double row 2×6 position, 0.1 spacing with 2×8 housing to protect pogo pins and have better position accuracy.
• Plunger is Rhodium plated, use high quality pins, and contact is gold plated.